Ask a Member

Purchasing advice for Bandsaw

Search This Thread

Arnold Elston

5/2/2025 8:04 AM

I have the opportunity to buy my first bandsaw. It is a used Rikon 10-310. The seller saws they can not keep the belt on track. Is this something that can be fixed or should I stay away and not buy the bandsaw. Your advice is appreciated.

Joshua Hahn

5/2/2025 8:34 AM

They likely do not have the wheels aligned correctly. Rikon is a great bandsaw but you will likely quickly need more capacity than a 10". 14" bandsaws are more common. I bought a 12" Craftsman years ago used on Facebook that has served me well. For what it's worth I'd encourage you to look for a larger model used. More importantly, the bandsaw blade is going to be key. Buy a new one and get a good brand. I use Timberwolf but there are others. Hopefully something here is helpful.

Joshua

kate hogan

5/2/2025 8:49 AM

Thanks!

Sent from my Galaxy

Joshua

Joshua Hahn

5/2/2025 9:00 AM

One other quick note. If you buy a bandsaw that doesn't have a fence or needs a better one buy the Kreg Bandsaw fence. It is fantastic and can be used on older saws. You just may have to drill new holes to fit it. With a good blade and fence you can make an older bandsaw run like new.

Tom Nichols

5/2/2025 9:27 AM

There are generally 2 reasons for the issue with tracking. The wheels are not adjusted properly, or the urethane bands on the wheels are worn out. Both are easily fixed. Also, make sure to adjust all your guide blocks. Bandsaws are awesome but require regular adjustments.

Arnold Elston

5/2/2025 9:31 AM

Thanks

Make it a safe day!

Arnold

Roger Poer

5/2/2025 9:43 AM

What Jousa said, is best advice.

Roger

Yahoo Mail: Search, Organize, Conquer

Roger Poer

5/2/2025 9:47 AM

Jousa advice is spot on.

Roger

Yahoo Mail: Search, Organize, Conquer

Arnold Elston

5/2/2025 9:55 AM

Thanks.

Make it a safe day!

Arnold

Arnold Elston

5/2/2025 9:29 AM

Thank you Joshua. I will take your advice.

Make it a safe day!

Arnold

Matt Porter

5/2/2025 12:01 PM

Here’s a link to YouTube Video -

Alex is the master of bandsaws ( in my opinion )

After seeing him in person at the woodworking shows - I have tuned up my old Delta and made some amazing cuts.

You may have to watch this a couple times - he goes pretty fast.

Bandsaw Tuneup

youtu.be

Matt Porter

Strive not to be a success, but rather to be of value.

-Albert Einstein-

kate hogan

5/2/2025 1:13 PM

Love it! Thanks!

Sent from my Galaxy

Here’s a link to YouTube Video -

Alex is the master of bandsaws ( in my opinion )

After seeing him in person at the woodworking shows - I have tuned up my old Delta and made some amazing cuts.

You may have to watch this a couple times - he goes pretty fast.

Bandsaw Tuneup

youtu.be

Matt Porter

Strive not to be a success, but rather to be of value.

-Albert Einstein-

Arnold Elston

5/2/2025 2:43 PM

Thank you for your help.

Make it a safe day! Arnold

Nathan Mundy

5/2/2025 7:31 PM

All good advice. It’s likely to be fixed up to good working order with a little elbow grease. Second Matt’s advice to follow along with Alex Snodgrass’ video. I have the 10-3061 (10” model) and it works great for my initial use case of working with smaller items. I primarily use to process turning blanks and cuts of smaller flat material. Would strongly advise thinking through what you would like to do with the saw. Highly recommend a saw with a deeper blade for resale work to make straight cuts easier. Mine only works with up to 1/2” blades and only 5” height of cut so not enough for that kind of work.

Nate

On Fri, May 2, 2025 at 1:48 PM Arnold Elston (arnelston@gmail.com) <AskaMember@ciww.org> wrote:

View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Arnold Elston at arnelston@gmail.com
If this message contains inappropriate content, you can report the message online
Thank you for your help.

Make it a safe day! Arnold

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

James Spray

5/2/2025 8:03 PM

https://www.facebook.com/share/1Bb6fubPPp/

Just seen this post on Facebook. You might check it out could be a good deal. They are located in Indy

On Fri, May 2, 2025, 7:32 PM Nathan Mundy (nmundy42@gmail.com) <AskaMember@ciww.org> wrote:

View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Nathan Mundy at nmundy42@gmail.com
If this message contains inappropriate content, you can report the message online
All good advice. It’s likely to be fixed up to good working order with a little elbow grease. Second Matt’s advice to follow along with Alex Snodgrass’ video. I have the 10-3061 (10” model) and it works great for my initial use case of working with smaller items. I primarily use to process turning blanks and cuts of smaller flat material. Would strongly advise thinking through what you would like to do with the saw. Highly recommend a saw with a deeper blade for resale work to make straight cuts easier. Mine only works with up to 1/2” blades and only 5” height of cut so not enough for that kind of work.

Nate

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

Arnold Elston

5/3/2025 11:54 AM

Thanks!

Make it a safe day! Arnold

On Fri, May 2, 2025 at 8:04 PM James Spray (Jspray83@gmail.com) <AskaMember@ciww.org> wrote:

View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to James Spray at Jspray83@gmail.com
If this message contains inappropriate content, you can report the message online
https://www.facebook.com/share/1Bb6fubPPp/

Just seen this post on Facebook. You might check it out could be a good deal. They are located in Indy

On Fri, May 2, 2025, 7:32 PM Nathan Mundy (nmundy42@gmail.com) <AskaMember@ciww.org> wrote:
View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Nathan Mundy at nmundy42@gmail.com
If this message contains inappropriate content, you can report the message online
All good advice. It’s likely to be fixed up to good working order with a little elbow grease. Second Matt’s advice to follow along with Alex Snodgrass’ video. I have the 10-3061 (10” model) and it works great for my initial use case of working with smaller items. I primarily use to process turning blanks and cuts of smaller flat material. Would strongly advise thinking through what you would like to do with the saw. Highly recommend a saw with a deeper blade for resale work to make straight cuts easier. Mine only works with up to 1/2” blades and only 5” height of cut so not enough for that kind of work.

Nate

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

Arnold Elston

5/3/2025 1:40 PM

I move to slow☹️

Make it a safe day! Arnold

On Fri, May 2, 2025 at 8:04 PM James Spray (Jspray83@gmail.com) <AskaMember@ciww.org> wrote:

View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to James Spray at Jspray83@gmail.com
If this message contains inappropriate content, you can report the message online
https://www.facebook.com/share/1Bb6fubPPp/

Just seen this post on Facebook. You might check it out could be a good deal. They are located in Indy

On Fri, May 2, 2025, 7:32 PM Nathan Mundy (nmundy42@gmail.com) <AskaMember@ciww.org> wrote:
View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Nathan Mundy at nmundy42@gmail.com
If this message contains inappropriate content, you can report the message online
All good advice. It’s likely to be fixed up to good working order with a little elbow grease. Second Matt’s advice to follow along with Alex Snodgrass’ video. I have the 10-3061 (10” model) and it works great for my initial use case of working with smaller items. I primarily use to process turning blanks and cuts of smaller flat material. Would strongly advise thinking through what you would like to do with the saw. Highly recommend a saw with a deeper blade for resale work to make straight cuts easier. Mine only works with up to 1/2” blades and only 5” height of cut so not enough for that kind of work.

Nate

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

Arnold Elston

5/3/2025 1:44 PM

Somebody bought the one on Facebook. If you see another, please let me know. Thank you.

Make it a safe day! Arnold

On Fri, May 2, 2025 at 7:32 PM Nathan Mundy (nmundy42@gmail.com) <AskaMember@ciww.org> wrote:

View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Nathan Mundy at nmundy42@gmail.com
If this message contains inappropriate content, you can report the message online
All good advice. It’s likely to be fixed up to good working order with a little elbow grease. Second Matt’s advice to follow along with Alex Snodgrass’ video. I have the 10-3061 (10” model) and it works great for my initial use case of working with smaller items. I primarily use to process turning blanks and cuts of smaller flat material. Would strongly advise thinking through what you would like to do with the saw. Highly recommend a saw with a deeper blade for resale work to make straight cuts easier. Mine only works with up to 1/2” blades and only 5” height of cut so not enough for that kind of work.

Nate

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

Michael Brady

5/3/2025 6:16 PM

I have a nice Jet bandsaw for sale. It's 14" on an enclosed Jet base with casters; plus extra assorted size blades.

Mike Brady 630-677-7521

Indy north side to see it, and many other tools for sale.

On Sat, May 3, 2025 at 1:46 PM Arnold Elston (arnelston@gmail.com) <AskaMember@ciww.org> wrote:

View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Arnold Elston at arnelston@gmail.com
If this message contains inappropriate content, you can report the message online
Somebody bought the one on Facebook. If you see another, please let me know. Thank you.

Make it a safe day! Arnold

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

Arnold Elston

5/4/2025 10:03 PM

Hi.

I’ve been out of town. Can you send a photo of the bandsaw and price?

Make it a safe day! Arnold

On Sat, May 3, 2025 at 6:18 PM Michael Brady (mikebrady25@gmail.com) <AskaMember@ciww.org> wrote:

View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Michael Brady at mikebrady25@gmail.com
If this message contains inappropriate content, you can report the message online
I have a nice Jet bandsaw for sale. It's 14" on an enclosed Jet base with casters; plus extra assorted size blades.

Mike Brady 630-677-7521
Indy north side to see it, and many other tools for sale.

On Sat, May 3, 2025 at 1:46 PM Arnold Elston (arnelston@gmail.com) <AskaMember@ciww.org> wrote:
View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Arnold Elston at arnelston@gmail.com
If this message contains inappropriate content, you can report the message online
Somebody bought the one on Facebook. If you see another, please let me know. Thank you.

Make it a safe day! Arnold

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

Arnold Elston

5/4/2025 10:13 PM

Can you send a photo of the bandsaw and price?

Make it a safe day! Arnold

On Sat, May 3, 2025 at 6:18 PM Michael Brady (mikebrady25@gmail.com) <AskaMember@ciww.org> wrote:

View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Michael Brady at mikebrady25@gmail.com
If this message contains inappropriate content, you can report the message online
I have a nice Jet bandsaw for sale. It's 14" on an enclosed Jet base with casters; plus extra assorted size blades.

Mike Brady 630-677-7521
Indy north side to see it, and many other tools for sale.

On Sat, May 3, 2025 at 1:46 PM Arnold Elston (arnelston@gmail.com) <AskaMember@ciww.org> wrote:
View/reply online
Reply to forum at AskaMember@ciww.org
Reply directly to Arnold Elston at arnelston@gmail.com
If this message contains inappropriate content, you can report the message online
Somebody bought the one on Facebook. If you see another, please let me know. Thank you.

Make it a safe day! Arnold

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

You have received this message as a member of: Central Indiana Woodworkers
Change preferences (including opt-out): Online Profile. Click on 'Forum Memberships' to change your settings for this forum, or 'Forum General Preferences' for all forums.

Return to Forum

Upcoming Events

Event Calendar:

Spotlight on our Sponsors!

The following are some of the generous businesses that help keep our Club going. Their gifts of cash, materials, shop supplies and tools greatly enhances our ability to work wood and make a difference in our community!

Rockler Woodworking
8452 Castleton Corner Dr.
Indianapolis, IN 46250

Woodcraft of Indianapolis
7330 East 86th Street
Indianapolis, IN 46256

Northwest Lumber Company
5035 Lafayette Rd.
Indianapolis, IN 46254

Merchants Bank
3737 E 96th Street
Indianapolis, IN 46240

Shepherd Community Center
4107 East Washington Street
Indianapolis, IN 46201

The Exhibit House

3500 N Arlington Ave

Indianapolis, IN 46218

Accurate Cutting Technologies
1111 Country Club Rd.
Indianapolis, IN 46234

Iso Tunes
12202 Hancock Street
Carmel, IN 46032

MacBeath Hardwood
320 North Kyle St
Edinburgh, IN 46124

MacAllister Machinery
6300 Southeastern Ave
Indianapolis, IN 46203